Worm Up Footwear Driers

How to use the footwear drier

Insert the heating elements into the boots and connect the power supply cable to an electrical wall outlet 230 V AC, (or to a 12 V DC). The assumed time for drying the boots up completely is 6-8 hours. The surface temperature of the heating element inside the boot does not exceed 60 to 70°C. Do not cover (block) the boot hole to allow the free air circulation. Combining with other heat sources is not allowed. Do not leave unattended longer than required.

Tips and Tricks

• The footwear drier is designed for footwear drying, and any other usage than recommended by the manufacturer may be potentially hazardous. The manufacturer and distributors are not responsible for any damages resulting from the improper usage.
• Please, keep in mind, that the footwear drier is an electrical device, and handle the footwear drier accordingly with care.
• Do not pull the cable when disconnecting from the power supply source, pull the plug connector only.
• Do not use outdoors, do not immerse into the water, keep away from children, etc.
• Do not disassemble, there are no serviceable parts inside the drier!
• The warranty period is 48 months from the date of purchase, provided that the owner's manual instructions are observed.

During the 8 years of manufacturing this device when tens of thousands units were produced, there happened no personal injury and/or property damages resulting from using this product.

Specifications

	VOT 230 - KLASIK / ARMY	VOT 12
power supply voltage:	230 V/50 Hz	12 V DC
power consumption:	9 W	9 W
heating element diameter::	30 nbsp;mm	30 mm
heating element length:	156 mm	156 mm
power cable length:	2 m	1 m
connecting cable length:	1 m	1 m

Certificates

• SZÚ - Final Protocol as per Act 22/97 Coll.
• SZÚ - Final report as per Acts 73/23/EEC, and 89/336/EEC.
• TSÚ - Certificate in Slovakia as per Act 436/2001 Coll.
• Declaration of Conformity

Gallery - Types